#
# lp_cfg for BR875 (ludpipo style programmer, with few modifications
#
#The prog84 programmer requires the following bits to be named:
#  power --- set to 1 when the programmer wants the PIC's Vdd = +5v
#  mclr  --- set to 1 when the programmer wants the PIC's /MCLR = +13v
#  clock --- used to clock data into the PIC (connect to PIC pin 12)
#  data  --- used to write data (pin 13)
#  data_f -- sense return for data (pin 13)
#  clock_f - sense return for clock (pin 12)

#  rb6   --- synonym for "clock"
#  rb7   --- synonym for "data"
#  rb6_f --- synonym for "clock_f"
#  rb7_f --- synonym for "data_f"

#but first the type: serial / parallel / usb

port serial 

### for serial port:
base= 0x3f8	# com1, ttyS0
#base= 0x2f8	# com2, ttyS1
#base= 0x3e8	# com3, ttyS2
#base= 0x2e8	# com4, ttyS3

#dos only:
loop = 15

#settings for BR875 and similar seriel PIC programmers.

no_power_C4C8 = 1

power: TxD
mclr: TxD
data: DTR
data_f: CTS
clock: RTS